Fiber ring laser thesis

This thesis presents a comprehensive experimental characterization and a theoretical analysis of a harmonically modelocked erbium fiber laser that is compatible with the current and future demands. For my thesis, i worked towards using two reference cavities to provide frequency stabilization to a 486nm dye-ring laser after a doubling cavity doubles the frequency to 243nm, the laser beam is used to excite ground state hydrogen to the 2s state: the first step of an experiment to accurately measure the 2s-ns transitions of hydrogen and. To construct the multi-ring cavity laser, 50/50 output couplers were incorporated into the ring laser two of the fiber ends were terminated at short distances to create small rings within the cavity to maximize the fsr. A ring laser is a laser the resonator of which has the form of a ring in contrast to a standing-wave laser resonator, such a ring resonator allows for two different propagation directions of the intracavity light. The timing jitter of a modelocked laser is fundamentally limited by the amplified spontaneous emission in the laser cavity while one cannot, even in principle, remove this source of noise, one.

fiber ring laser thesis The main objective of this thesis is to explore the use of volume holographic elements recorded in photo-thermo-refractive (ptr) glass for power scaling of narrow linewidth diffraction-limited fiber lasers to harness high average power and high brightness beams.

It has been decisive in the process of writing this thesis, the discussions and talks about the topics covered i would like to give special thanks to dr takashi buma, whose support locking fiber ring laser capable of producing sub 100 fs optical pulses the cavity is. Abstract this thesis describes the semiconductor laser signal and noise propagation effects in single mode fiber and fiber bragg gratings the capability to fabricate custom fiber bragg gratings was developed, which enabled the design and fabrication of gratings for a number of applications. Its application in tunable narrow linewidth fiber ring laser 陈 敏 秀 指导教师姓名: 董 小 鹏 教授 专 业 名 称 : 无 线 电 物 理 the thesis proposes that two fbg-fp.

Theory of the self-starting passive mode-locked yb~ 3+ -doped fiber ring laser generating short pulses is presented 讨论了自启动 the thesis researched a kind of. Fiber couplers and collimators are used for collimating laser radiation exiting an optical fiber or for coupling a collimated beam into an optical fiber cable. Fiber is pumped by a multimode diode laser with an output power of up to 15 w at a wavelength of 980 nm mode-locking can be readily realized by simply tuning the polarization controllers. “pumping schemes for high concentration erbium-doped fiber amplifier (edfa),” ms thesis, kenji konno, april 2002 “studies of dynamic change in reflectivity of thin film metal and phase-change media induced by sub-nanosecond laser pulses,” ms thesis, kazuo watabe, january 2004.

A semiconductor optical-fiber ring laser was constructed using an algaas/gaas multiple quantum well laser diode as a gain medium the single-mode oscillation was demonstrated and the measured spectral linewidth was less than 45 khz this is consistent with a theoretical calculation of its linewidth. Single-mode raman fiber laser in a multimode fiber thesis matthew b crookston, 2lt, usaf afit/gap/enp/03-03 the views expressed in this thesis are those of the author and do not reflect the official policy or position of the united states air force, department of defense, or the us. An investigation of mode-locked fiber ring lasers and their applications in photonic generation of microwave signals is presented in this thesis both passive mode locking and active mode locking are investigated for the passive mode-locking, a fiber laser with figure-eight structure that. In this thesis, a tunable external-cavity fiber bragg grating (fbg) diode laser was developed for spectroscopic chemical sensing although fbg lasers have been reported upon.

Fiber ring laser thesis

A multi-wavelength fiber laser source is demonstrated with a high power erbium-doped fiber amplifier as the gain medium in order to alleviate the mode competition, a highly nonlinear fiber (hnlf) is inserted in the ring cavity to provide nonlinear effects. Anomalous fiber optic gyroscope signals observed above spinning rings at low temperature [email protected] abstract precision fiber optic gyroscopes were mounted mechanically de-coupled above spinning rings inside a cryostat test to look for frame-dragging from a spinning lead disc at 4 k using the world’s largest ring-laser. A ring laser is described comprising: a semiconductor single crystal external ring resonator cavity having a plurality of reflecting surfaces defined by the planes of the crystal and establishing a closed optical path and a discrete laser medium disposed in said semiconductor single crystal. Fiber optic sensor based on dual ring resonator system by chenjun fan a thesis submitted in partial fulfillment ofthe requirements for the degree ofmasterofscience.

A regeneratively modelocked, fiber ring laser research and teaching output of the mit community thesis (ms)--massachusetts institute of technology, dept of electrical engineering and computer science, 1997 includes bibliographical references (leaves 65-70) by matthew edward grein. In this thesis, i'll focus on the study of cavity solitons in fiber laser first of all, inspired by modulation instability induced by cavity boundary conditions in the externally pumped nonlinear fiber ring cavities, the cavity induced modulation instability (cimi) is both theoretically and experimentally confirmed existing in a fiber ring laser.

Final year thesis title: study of dispersion compensation in chirped pulse amplification system (in chinese) “ characterization of 45-tilted fiber grating and its ”,. Abstract we propose and experimentally demonstrate the principle of a tunable multiwavelength fiber ring laser based on the use of an opto-very-large-scale-integration (opto-vlsi) processor in conjunction with an erbium-doped fiber amplifier and a semiconductor optical amplifier. Abstract this thesis reports our attempt towards achieving a phase stabilized free-space nonlinear polarization rotation (npr) mode locked erbium doped fiber laser frequency comb system. Abstract this thesis addresses three areas in the field of fiber lasers: theoretical study of general fiber ring compound resonators and a new all-fiber compound-ring resonator: fabrication of a single-longitudinal-mode compound-ring er^{3+}-doped fiber laser based on the proposed passive resonator and both theoretical and experimental studies of the laser frequency stability and the laser.

fiber ring laser thesis The main objective of this thesis is to explore the use of volume holographic elements recorded in photo-thermo-refractive (ptr) glass for power scaling of narrow linewidth diffraction-limited fiber lasers to harness high average power and high brightness beams.
Fiber ring laser thesis
Rated 4/5 based on 12 review

2018.